17
EnGLIsh
Battery Worklight Use and Care
a )
Recharge only with the charger specified by the
manufacturer.
A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
b )
Use worklights only with specifically designated
battery packs.
Use of any other battery packs may create
a risk of injury and fire.
c )
When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys, nails,
screws or other small metal objects that can make
a connection from one terminal to another.
Shorting
the battery terminals together may cause burns or a fire.
d )
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid
ejected from the battery may cause irritation or burns.
Service
a )
Have your worklight serviced by a qualified repair
person using only identical replacement parts.
This
will ensure that the safety of the worklight is maintained.
Additional Specific Safety Rules for
Worklights
WARNING:
Fire hazard. Do not operate worklight near
flammable liquids or in gaseous or explosive atmospheres.
Internal sparks may ignite fumes causing personal injury.
• Do not expose light to wet or damp areas. Do not expose light
to rain or snow.
• Do not wash light with water or allow water to get inside light.
Do not submerge light in water at any time.
WARNING:
Do not place the worklight in a position which
may cause anyone to intentionally or unintentionally stare
into the light. Serious eye injury could result.
CAUTION: When not in use, place worklight on its
side on a stable surface where it will not cause a
tripping or falling hazard.
Some products with large
battery packs will stand upright on the battery pack but
may be easily knocked over.
SAVE THESE INSTRUCTIONS
Chargers
D
e
WALT
chargers require no adjustment and are designed to be
as easy as possible to operate.
Electrical Safety
The electric motor has been designed for one voltage only.
Always check that the battery pack voltage corresponds to the
voltage on the rating plate. Also make sure that the voltage of
your charger corresponds to that of your mains.
Congratulations!
You have chosen a
D
e
WALT
tool. Years of experience, thorough
product development and innovation make
D
e
WALT
one of the
most reliable partners for professional power tool users.
Technical Data
DCL050
Voltage
V
DC
18
Type
2
Battery type
Li-Ion
Weight (without battery pack)
kg
0.68
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER:
Indicates an imminently hazardous
situation which, if not avoided,
will
result in
death or
serious injury
.
WARNING:
Indicates a potentially hazardous situation
which, if not avoided,
could
result in
death or
serious injury
.
CAUTION:
Indicates a potentially hazardous situation
which, if not avoided,
may
result in
minor or
moderate injury
.
NOTICE:
Indicates a practice
not related to
personal injury
which, if not avoided,
may
result in
property damage
.
Denotes risk of electric shock.
Denotes risk of fire.
WARNING:
To reduce the risk of injury, read the
instruction manual.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE.
Safety Warnings
WARNING! Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
WARNING!
•
DO NOT stare directly into the light source.
•
DO NOT use optical instruments to look directly
into the light source.
•
DO NOT point the light into other people’s eyes.
English (original instructions)
CORDLESS LED WORKLIGHT
DCL050
