20
21
EN
EN
EN
EN
Auto Seek:
.
1
Select
Auto Scan
. The stations are automatically scanned, until a station with strong and
clear reception is reached.
2.
Once a desired station is reached, press and hold the touch button of the desired preset
number. A message
Saved Preset #
flashes, and the station number lights in yellow.
The station is stored in the displayed Favorites number (#).
3.
Rotate the
Selection Dial
to scan to the next station.
a. Rotate clockwise to scan up the frequencies.
b. Rotate counterclockwise to scan down the frequencies.
4.
Repeat steps 2 and 3 to set additional favorite stations.
Manual Seek:
.
1
Select
Manual Scan.
.
2
Rotate the Selection Dial to search for the next station.
•
Rotate clockwise to go up the frequencies.
•
Rotate counterclockwise to go down the frequencies.
.
3
Once a desired station is reached, press and hold the touch button of the desired preset
number. A message
Saved Preset #
flashes, and the station number lights in yellow.
IMPORTANT RADIO NOTES
.
1
Reception will vary depending on location and strength of radio signal.
.
2
Playing the radio while connected to certain generators may cause background noise.
EXTERNAL DEVICES (BLUETOOTH®/AUX)
The TSTAK
®
CONNECT RADIO + CHARGER can be used to play sound from an external device
through its built-in speakers via two connection options:
•
Bluetooth
®
•
3.5mm Auxiliary input jack
NOTE:
The compartment can also be used to store, protect and charge portable audio
devices, such as a smartphone or MP3 player. The USB power port can charge/power most
devices that have a USB connection (5V/2.1A).
BLUETOOTH
®
MODE
The TSTAK
®
CONNECT RADIO + CHARGER can connect to Bluetooth
®
enabled audio devices.
The Bluetooth
®
mode can store up to 6 paired users.
Bluetooth
®
LED
A blue LED indicates the Bluetooth
®
status
Blue
Bluetooth connected to Mobile App
Off
Not connected (light does not need to be on for connecting to the device)
Connecting to Bluetooth
®
.
1
Press the
Home
button
and select BT as the audio source.
.
2
Press the Bluetooth
®
touch button to disconnect any other connected device.
.
3
Enable Bluetooth
®
discovery on the audio device you wish to connect.
.
4
Scan for the TSTAK
®
CONNECT RADIO + CHARGER, display name: TSTAK_XXXX (where
XXXX is an identifier of the device) and select it.
Once paired and connected, the connected device name is displayed on the screen.
Disconnecting the Connected Device
From the Bluetooth
®
screen press the Bluetooth
®
touch button. The Bluetooth
®
LED
changes from yellow to gray.
Changing the Connected Device
.
1
From the Bluetooth
®
screen, press the settings
touch button. A list of all recognized
mobile devices appears.
.
2
Press the touch button next to the required user name. The device will be discovered and
connected (if Bluetooth
®
is enabled on the audio device).
Playing Audio through Bluetooth
®
Any audio (as music) stored on a mobile device that is connected via Bluetooth
®
to the TSTAK
®
CONNECT RADIO + CHARGER can be streamed from the connected device to the TSTAK
®
CONNECT RADIO + CHARGER.
After connecting a mobile device via Bluetooth® do one of the following:
•
Press the
Selection Dial
to play the last played song.
The song name is displayed on the screen.
•
Press the Left or Right buttons
to move up/down your songs (audio) list.
CONNECTING AN AUXILIARY AUDIO DEVICE
.
1
Connect a 3.5 mm audio cable (not provided) between the 3.5mm Auxiliary input jack and
the output jack of your audio device.
.
2
Press
AUX
as the audio source. The screen displays an AUX figure.
.
3
Operate the audio through the connected device.
APPLIANCE SETTINGS
.
1
Press the Home button
.
2
Press the Settings touch button
Settings to the following can be performed:
System, Sound, Display, Bluetooth
®
, AM
and
FM
.
