12
ENGLISH
MAINTENANCE
• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained. Contact Klein Tools for authorized service centers. Visit
www.kleintools.com
for service manual and replacement part list.
• The charger and battery pack are
NOT
serviceable. To assure product safety and reliability, repairs, maintenance
and adjustments should be performed by a DeWALT factory service center, a DeWALT authorized service center
or other qualified service personnel. Always use identical replacement parts.
• Use only
Shell Telus T15
or an equivalent hydraulic fluid when changing or adding oil.
• Inform Klein Tools authorized distributors or contact Klein Tools in case of any abnormalities or malfunctions of
the product.
Shell
®
and Tellus
®
are registered trademarks of Shell Trademark Management B.V.
CLEANING
Tool:
• Blow dirt and dust out of all air vents with clean, dry air at least once a week. To minimize the risk of eye injury,
always wear ANSI Z87.1 approved eye protection when performing this.
• Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. These chemicals
may weaken the plastic materials used in these parts. Use a cloth dampened only with water and mild soap.
Never immerse any part of the tool into a liquid.
Charger:
WARNING
:
SHOCK HAZARD
. Disconnect the charger from the AC outlet before cleaning. Dirt and grease may
be removed from the exterior of the charger using a cloth or soft non-metallic brush.
DO NOT
use water or any
cleaning solutions.
STORAGE
The best storage place is one that is cool and dry, away from direct sunlight and excess heat or cold. For
prolonged storage, it is recommended to store a fully charged battery pack in a cool, dry place out of the charger
for optimal results.
NOTE:
Battery packs should not be stored completely depleted of charge. The battery pack will
need to be recharged before use.
WARRANTY – TOOL
Klein Tools Battery Operated Tools, manufactured and sold for commercial or industrial uses, are warranted to be free
from defects in materials and workmanship.
THERE ARE NO IMPLIED WARRANTIES OF MERCHANTIBILITY OR FITNESS. At its option, Klein will repair, replace, or
refund the purchase price of any product which fails to conform to this warranty under normal use and service. There are
no user serviceable parts in this tool. This warranty does not apply if repairs have been made or attempted by non-Klein
Tools Authorized Repair Centers, if alterations have been made, or if the tool has been abused or misused.
IN NO EVENT SHALL KLEIN TOOLS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGE. Some states do not allow
exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
See
www.kleintools.com/warranty
for additional information.
WARRANTY – CHARGERS AND BATTERY PACKS
DeWALT
chargers
are covered by:
Three Year Limited Warranty
: DeWALT will repair, without charge, any defects due to faulty materials or
workmanship for three years from the date of purchase. This warranty does not cover part failure due to normal
wear or tool abuse. For further detail of warranty coverage and warranty repair information, visit www.dewalt.com
or call 1-800-4-DeWALT (1-800-433-9258). This warranty does not apply to accessories or damage caused where
repairs have been made or attempted by others. This warranty gives you specific legal rights and you may have
other rights which vary in certain states or provinces.
DeWALT
battery packs
are covered by:
Two Years free service on Packs:
DCB201, DCB203, DCB203BT, DCB207.
Three Years free service on Packs:
DCB200, DCB204, DCB204BT, DCB205.
Product warranty voided if the battery pack is tampered with in any way. DeWALT is not responsible for any injury
caused by tampering and may prosecute warranty fraud to the fullest extent permitted by law.
For more information on DeWALT service or warranties, visit
www.dewalt.com
or call
1-800-4-DeWALT
(
1-800-433-9258
).
Summary of Contents for Klein Tool BAT20-7T16
Page 42: ...42 NOTES NOTAS REMARQUES ...
Page 43: ...43 NOTES NOTAS REMARQUES ...
