10
E
n
g
lis
h
INStALLAtIoN
Pressure Washer Assembly
1. Attach high-pressure
N
M
hose (M) to spray gun.
Make sure it is secure.
2. Connect wand (N) to
spray gun. Make sure
connection is secure.
note:
The high-pressure
pump was filled with oil at the factory. Always check oil level before
using (refer to
Maintenance
for more information).
oPErAtIoN
Pressure Adjustments
The pressure setting is preset at the factory to achieve op ti mum
pressure and cleaning. To lower the pres sure, follow these instructions.
1. Back away from the sur face to be cleaned. The further away you
are, the less the pressure will be on the surface to be cleaned.
2. Change to the 40˚ nozzle (white). This nozzle delivers a less
powerful stream of water and a wider spray pattern. Refer to
spray Wand nozzles
.
NOTICE:
DO NOT attempt to increase pump pressure. A higher
pressure setting than the factory set pressure may damage pump.
3. Reduce the speed of the gasoline engine (RPM). Slow the engine
down and the water pressure will go down with it.
Spray Wand Nozzles (Fig. 1)
The nozzles (B) for the spray wand are stored in the nozzle holder on the
panel assembly. Colors on the panel identify nozzle location and spray
pattern. Refer to the following chart to choose the correct nozzle for
the job to be performed.
nozzle color
spray Pattern
uses
surfaces*
Yellow
15˚
intense cleaning
of unpainted
hard surfaces
grills, driveways,
concrete or
brick walkways,
unpainted brick or
stucco
Green
25
˚
standard
cleaning nozzle
for most
applications
yard tools,
sidewalks,
lawn furniture,
unpainted siding,
stucco, gutters
and eaves,
concrete, brick
surfaces
White
40
˚
cleaning
of painted
or delicate
surfaces
auto/RV, marine,
wood, painted
brick and stucco,
vinyl, painted
siding
Black
low pressure
applies cleaning
solutions
low pressure
spray is safe
on all surfaces.
always verify
compatibility of
cleaning solution
prior to use
*
NOTICE:
The high-pressure spray from your pressure washer
is capable of causing damage to surfaces such as wood, glass,
automobile paint, auto striping and trim, delicate objects such
as flowers and shrubs. Before spraying, check the item to
be cleaned to assure yourself that it is strong enough to resist
damage from the force of spray.