DeWalt DXPW3200V, Manual

Page: 6 / 16

4
English
• Heat will expand fuel in
the tank which could
result in spillage and
possible fire explosion.
• Keep maximum fuel level
12.7 mm below bottom
of filler neck to allow
for expansion.
• Operating the pressure
washer in an explosive
environment could result
in a fire.
• Operate and fuel
equipment in well-
ventilated areas free from
obstructions. Equip areas
with fire extinguisher
suitable for petrol fires.
• Materials placed against
or near the pressure
washer can interfere with
its proper ventilation
features causing
overheating and possible
ignition of the materials.
• Never operate pressure
washer in an area
containing dry brush
or weeds.
• Muffler exhaust heat can
damage painted surfaces,
melt any material
sensitive to heat (such
as siding, plastic, rubber,
vinyl or the pressure
hose, itself), and damage
live plants.
• Always keep pressure
washer a minimum
of 1.2 m away from
surfaces (such as houses,
automobiles or live
plants) that could be
damaged from muffler
exhaust heat.
• Improperly stored fuel
could lead to accidental
ignition. Fuel improperly
secured could get into the
hands of children or other
unqualified persons.
• Store fuel in an approved
container, in a secure
location away from
work area.
• Use of acids, toxic or
corrosive chemicals,
poisons, insecticides, or
any kind of flammable
solvent with this product
could result in serious
injury or death.
• Do not spray
flammable liquids.
DANGER: RISK TO BREATHING (ASPHYXIATION)
WhAT CAn hAPPEn hOW TO PREVEnT iT
• Breathing exhaust
fumes will cause serious
injury or death! Engine
exhaust contains carbon
monoxide, an odorless
and deadly gas.
• Operate pressure washer
in a well-ventilated
area. Avoid enclosed
areas such as garages,
basements, etc.
• Never operate unit in or
near a location occupied
by humans or animals.
• Some chemical/cleaning
soaps contain substances
which could cause injury
to skin, eyes or lungs.
• Use only chemical/
cleaning soaps specifically
recommended for
high pressure washers.
Follow manufacturers
recommendations.
Do not use chlorine
bleach or any other
corrosive compound.
DANGER: RISK OF FLUID INJECTION AND
LACERATION
WhAT CAn hAPPEn hOW TO PREVEnT iT
• Your pressure washer
operates at fluid pressures
and velocities high
enough to penetrate
human and animal flesh
which could result in
amputation or other
serious injury. Leaks
caused by loose fittings or
worn or damaged hoses
can result in injection
injuries. DO NOT TREAT
FLUID INJECTION AS
A SIMPLE CUT! See a
physician immediately!
• Inspect the high pressure
hose regularly. Replace
the hose immediately if
it is damaged, worn, has
melted from contacting
the engine, or shows any
signs of cracks, bubbles,
pinholes, or other
leakage. Never grasp a
high pressure hose that is
leaking or damaged.
• Never touch, grasp
or attempt to cover a
pinhole or similar water
leak on the high pressure
hose. The stream of water
IS under high pressure
and WILL penetrate skin.
• Never place hands in front
of nozzle.
• Direct spray away from
self and others.
• Make sure hose and
fittings are tightened and
in good condition. Never
hold onto the hose or
fittings during operation.
• Do not allow hose to
contact muffler.
• Never attach or
remove wand or hose
fittings while system
is pressurized.