background image

5

English

• Your pressure washer 

operates at fluid pressures 
and velocities high 
enough to penetrate 
human and animal flesh 
which could result in 
amputation or other 
serious injury. Leaks 
caused by loose fittings or 
worn or damaged hoses 
can result in injection 
injuries. DO NOT TREAT 
FLUID INJECTION AS 
A SIMPLE CUT! See a 
physician immediately! 
(continued)

• When using replacement 

spray wands or guns with 
this pressure washer, do 
not use a wand and/or 
wand/gun combination 
that is shorter in length 
than what was provided 
with this pressure washer 
as measured from the 
nozzle end of the spray 
wand to the spray 
gun trigger.

• Injuries can result if 

system pressure is 
not reduced before 
attempting maintenance 
or disassembly.

• To relieve system pressure, 

shut off engine, turn off 
water supply and pull 
spray gun trigger until 
water stops flowing.

• Use only accessories 

rated equal to or higher 
than the rating of the 
pressure washer.

DANGER: RISK OF INJURY FROM SPRAY 

WhAT CAn hAPPEn

hOW TO PREVEnT iT

• High-velocity fluid spray 

can cause objects to 
break, projecting particles 
at high speed.

• Always wear ANSI-

approved Z87.1 
safety glasses. Wear 
protective clothing 
to protect against 
accidental spraying.

• Never point wand at or 

spray people or animals.

• Light or unsecured 

objects can become 
hazardous projectiles.

• Always secure trigger 

lock when wand is not 
in service to prevent 
accidental operation.

• Never permanently 

secure trigger in pull-back 
(open) position.

DANGER: RISK OF UNSAFE OPERATION 

WhAT CAn hAPPEn

hOW TO PREVEnT iT

• Unsafe operation of your 

pressure washer could 
lead to serious injury or 
death to you or others.

• Do not use chlorine 

bleach or any other 
corrosive compound.

• Become familiar with the 

operation and controls of 
the pressure washer.

• Keep operating area 

clear of all persons, pets 
and obstacles.

• Do not operate the 

product when fatigued 
or under the influence 
of alcohol or drugs. Stay 
alert at all times.

• Never compromise 

the safety features of 
this product.

• Do not operate machine 

with missing or broken 
parts. Use only identical 
replacement parts.

• Never leave spray gun/

wand unattended while 
unit is running.

• If proper manual starting 

procedure is not followed, 
engine can kickback 
causing serious hand and 
arm injury.

• If engine does not start 

after two pulls, squeeze 
trigger of gun to relieve 
pump pressure. Pull 
starter cord slowly until 
resistance is felt. Then 
pull cord rapidly to avoid 
kickback and prevent 
hand or arm injury.

• The spray gun/wand is 

a powerful cleaning tool 
that could look like a toy 
to a child.

• Keep children away from 

the pressure washer at 
all times.

• Reactive force of spray 

will cause gun/wand to 
kickback, and could cause 
the operator to slip or fall 
or misdirect the spray. 
Improper control of gun/
wand can result in injuries 
to self and others.

• Do not overreach or stand 

on an unstable support.

• Do not use pressure 

washer while standing on 
a ladder.

• Grip gun/wand firmly 

with both hands. Expect 
the gun to kickback 
when triggered.

Summary of Contents for DXPW3200V

















Reviews: