background image

ENGLISH

43

GUARANTEE

D

E

WALT is confident of the quality of its 

products and offers an outstanding guarantee 
for professional users of the product. This 
guarantee statement is in addition to and in 
no way prejudices your contractual rights as a 
professional user or your statutory rights as a 
private non-professional user. The guarantee 
is valid within the territories of the Member 
States of the European Union and the 
European Free Trade Area.

 30 DAY NO RISK SATISFACTION GUARANTEE 

If you are not completely satisfied with the 
performance of your D

E

WALT tool, simply 

return it within 30 days, complete with all 
original components, as purchased, to 
the point of purchase, for a full refund or 
exchange. The product must have been 
subject to fair wear and tear and proof of 
purchase must be produced.

 ONE YEAR FREE SERVICE CONTRACT 

If you need maintenance or service for your 
D

E

WALT tool, in the 12 months following 

purchase, you are entitled to one service free 
of charge. It will be undertaken free of charge 
at an authorised D

E

WALT repair agent. Proof 

of purchase must be produced. Includes 
labour. Excludes accessories and spare parts 
unless failed under warranty.

• 

ONE YEAR FULL WARRANTY 

If your D

E

WALT product becomes defective 

due to faulty materials or workmanship 
within 12 months from the date of purchase, 
D

E

WALT guarantees to replace all defective 

parts free of charge or – at our discretion – 
replace the unit free of charge provided that:

  •  The product has not been misused;
  •  The product has been subject to fair 

wear and tear;

  •  Repairs have not been attempted by 

unauthorised persons;

  •  Proof of purchase is produced;
  •  The product is returned complete with all 

original components.

If you wish to make a claim, contact your 
seller or check the location of your nearest 
authorised D

E

WALT repair agent in the 

D

E

WALT catalogue or contact your D

E

WALT 

office at the address indicated in this manual. 
A list of authorised D

E

WALT repair agents and 

full details of our after-sales service is available 
on the Internet at: 

www.2helpU.com

.

Summary of Contents for DWE46101


















Reviews: