DeWalt DW735-XE, Instruction Manual

Page: 3 / 16

1
Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal
word. Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury .
WARNING: Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury .
CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury .
NOTICE: Indicates a practice not related to personal injury which, if
not avoided, may result in property damage.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D
E
WALT TOOL,
CALL US AT: 1800 444 224 (Aust) or 0800 339 258 (NZ).
Technical Data
DW735-XE
Voltage V 230–240
Power input W 2000–2200
No-load/rated speed min
-1
10000
Operating / Resting time min 1/3
Feed Speed m/min (ft./min) 4.3 (14) or 7.0 (26)
Cutting height (max.) mm (") 152 (6)
Cutting width (max.) mm (") 330 mm (13)
Max. cutting depth
for max. board width of 152 mm (6")
mm (") 3 mm (1/8)
Weight kg 42.6
L
PA
(sound pressure) dB(A) 95
K
PA
(sound pressure uncertainty) dB(A) 3.3
L
WA
(sound power) dB(A) 108
K
WA
(sound power uncertainty) dB(A) 3.7
The vibration emission level given in this information sheet has been measured in
accordance with a standardised test given in EN 60745 and may be used to compare
one tool with another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration emission level represents the main applications
of the tool. However if the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account
the times when the tool is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator from the effects of
vibration such as: maintain the tool and the accessories, keep the hands warm,
organisation of work patterns.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions Failure to follow
the warnings and instructions may result in electric shock, fire and/or serious
injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR
FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.