DeWalt DW080LGS, Manual

Page: 22 / 82

22
E
To unlock the remote and reset it back to Public mode so it can be used
to control any laser unit again, press and hold the RPM button on the
remote keypad.
Resetting a Remote from Private Mode
When a remote is in Private Mode with a laser unit, you may need to
reset the remote in order to use it with the laser unit again.
Scenario How to Recover
When pressing and holding
15˚/45˚/90˚
on the laser keypad, the
laser entered No Remote
mode.
On the laser keypad, press and hold
the RPM button to return the laser to
Public mode so it can be controlled by
any remote.
The laser unit entered
Private mode while paired
with another remote.
Reset the laser unit back to Public
mode. On the laser keypad, either :
• Press for 3 sec to turn the
power off and then press again
to turn the power back on, OR
• Press and hold the RPM button.
If the Lock LED is lit on
the remote, the remote has
been paired with another
rotary laser.
Press and hold the RPM button on the
remote to reset it to Public mode.
Controlling the Laser from up to 100’ Away
You can use Bluetooth
®
capability to pair the laser with the DEWALT
®
Tool Connect™ application on your cell phone, and then use your cell
phone to control the laser (Figure
J 2
).
1.
From either or , download the DEWALT
®
Tool Connect™ application to your cell phone and then open the
application.
2.
On the laser’s keypad, press to turn the laser on.
3.
Pair the DEWALT
®
Tool Connect™ application to the laser via a
Bluetooth
®
connection.
First Time Pairing Paired Before
1. On the D
E
WALT
®
Tool
Connect™ application, click .
2. In the list of D
E
WALT product
types, select Rotary Laser .
3. Enter a Name for the rotary
laser (e.g., DW080LRS/LGS).
4. On the laser keypad, press
and hold for 3-5 sec until the
Bluetooth
®
connection turns on
(blue LED starts blinking).
5. When the application lists
the laser’s model number as IN
RANGE, select it.
On the laser keypad,
press to turn on the
Bluetooth
®
connection.
NOTE:
If the Bluetooth
®
connection does not turn on, replace the 20V
battery.
4.
On the D
E
WALT
®
Tool Connect™ application, select the DW080LRS/
LGS rotary laser.
5.
The D
E
WALT
®
Tool Connect™ application will display information
about the laser on the Diagnostics screen:
• If the current settings are one of the "favorite settings" you have
saved for the laser, it will display the name of that setting (e.g.,
Main St - Site 1 ).
• If the laser is dropped, disturbed, etc., it will send messages to
the Tool Connect™ application to inform you.
• If the Tracking feature is on, the application will know where the
laser is and will let you know if the laser has been taken and is
now out-of-range. (The Coin Cell battery enables the Tracking
feature.)
6.
Select ACTIONS .
• If you are using more than one rotary laser and need to check
which laser is paired with the application, press the Identify
button at the bottom of the screen. On the paired laser, the
blue LED next to will blink.
• If you need to, you can enable, disable, or unpair the laser.