16
E
Call 2 Recycle, Inc., in cooperation with
D
e
WALT
and other battery users,
has established the program in the United States and Canada to facilitate the
collection of spent nickel cadmium, nickel metal hydride or lithium-ion batteries.
Help protect our environment and conserve natural resources by returning
the spent nickel cadmium, nickel metal hydride or lithium-ion batteries to an
authorized
D
e
WALT
service center or to your local retailer for recycling. You may
also contact your local recycling center for information on where to drop off the
spent battery. RBRC® is a registered trademark of Call 2 Recycle, Inc.
Operating Tips
• To extend battery life per charge, turn the laser off when it is not
in use.
• To ensure the accuracy of your work, check the laser calibration
often. Refer to
Checking the Calibration.
• Before attempting to use the laser, make sure the tool is
positioned on a relatively smooth, secure surface.
• Always mark the center of the laser line or dot. If you mark
different parts of the beam at different times you will introduce
error into your measurements.
• To increase working distance and accuracy, set up the laser in the
middle of your working area.
• When attaching to a tripod or wall, mount the laser securely.
• When working indoors, a slow rotary head speed will produce
a visibly brighter line, a faster rotary head speed will produce a
visibly solid line.
• To increase beam visibility, wear Laser Enhancement Glass es
(Figure
T
)
and/or use a Laser Target Card
(Figure
S
)
to help find
the beam.
• Extreme temperature changes can cause movement or shifting
of building structures, metal tripods, equipment, etc., which can
effect accuracy. Check your accuracy often while working.
• If the laser is dropped or has suffered a sharp blow, have the
calibration system checked by a qualified service center before
using the laser.
Turning the Laser On
1.
Insert the fully charged D
E
WALT 20V battery pack as shown in
Figure
D
.
2.
Gently press the power button
to power ON the laser:
• The power LED indicator light (Figure
A
3
) will illuminate.
• Self-leveling mode is activated automatically and the laser unit
will self-level. Once the laser unit is level, the beam will rotate
clockwise once at 600RPM.
• 30 sec. after the last button press,
HI Mode
(
H
eight of
I
nstument, Anti-Drift) is activated automatically and the
HI
LED
(Figure
A
2
) will illuminate. (You can disable
HI Mode
by
holding down the
Slope Mode
button for 2 secs. The laser
will beep twice and the HI Mode LED will turn off.
NOTE:
when
HI Mode
is
disabled
, the laser cannot detect any movement
after setup, so accuracy cannot be guaranteed.)
3.
Press (Figure
A
16
) to adjust the
Rotation Speed
of the
laser beam through its 4 preset speeds (150, 300, 600, and
1200 RPM). NOTE: Accuracy is best optimized at 600 RPM or
less.
4.
To change the
Direction of the laser beam
while in self-leveling
mode, press
or (Figure
A
18
or
19
).
5.
Press the
Scan Mode
button
15˚/45˚/90˚
(Figure
A
17
) to set the laser
to scan in 0°, 15°, 45°, or 90°
angle
mode.
•
15˚/45˚/90˚
is used to make the laser head sweep back and forth,
creating a short, bright laser line. This short line is much
brighter and more visible than when the unit is in full rotation
mode.
• The direction of the scan zone can be controlled with the arrow
buttons and (Figure
A
18
or
19
)
6.
If you press the
Slope Mode
button to turn ON Slope Mode,
the unit automatically engages the X-Axis. This allows you to
slope the laser in the direction of the X-Axis, as indicated by the
X
mark on the top roll cage.
• In certain situations, it may be desirable to slope the laser in
the Y-axis. The direction of Slope Mode can be changed back
and forth between the Y-axis and the X-axis by pressing the
X-Y axis button (Figure
A
13
).
Summary of Contents for DW080LGS
