![background image](http://html.mh-extra.com/html/dewalt/dw040/dw040_original-instructions-manual_88402049.webp)
ENGLISH
47
Installing and Removing Battery (fi g. 1, 3)
NOTE:
This LDM is powered by two LR03 (AAA-size) 1.5 V
DC
batteries.
INSTALLING THE BATTERY PACK
1. Lift up the battery compartment cover (a) as shown in figure 1.
2. Insert two LR03 (AAA-size) batteries into the compartment, placing
the batteries according to + and – icons on the inside of the
compartment.
NOTE:
When the battery indicator (o) flashes in the LCD, the batteries
are nearing the end of usable life.
Attachment of Wrist Strap (fi g. 2)
Refer to figure 2 for instructions.
OPERATION
WARNING!
Do not place the laser in a position which
may cause anyone to intentionally or unintentionally
stare into the laser beam.
Serious eye injury may result
from staring at the beam.
Instructions for Use
WARNING:
Always observe the safety instructions and
applicable regulations.
CAUTION:
Use of controls or adjustments or performance
of procedures other than those specified herein may result
in hazardous radiation exposure.
CAUTION:
To reduce the risk of personal injury or property
damage and to ensure consistent, high-quality readings,
control measurements should be performed periodically
and before and after important measurements. Refer to
Field Calibration Check
under
Maintenance
.
IMPORTANT NOTE:
All measurements are relative to the base of the
LDM (fig. 4).
Summary of Contents for DW040
