english
47
CAUTIOn:
To reduce the risk of personal injury or property
damage and to ensure consistent, high-quality readings,
control measurements should be performed periodically
and before and after important measurements. Refer to
Field Calibration Check
under
maintenance
.
IMPORTANT NOTE:
All measurements are relative to the base of the
LDM (fig. 5).
Laser control Panel
to tUrn the Laser distance measUrer (Ldm) on
DIST
(fig. 2, 3)
1. Insert two LR03 (AAA-size) battery as previously directed. Be sure
that the battery door (a) is securely latched.
2. Press DIST (ON) to power the LDM. A red laser dot will illuminate
where the LDM is pointed.
NOTE:
Battery icon appears when the LDM is turned on and
displays until a measurement is taken.
to tUrn the Laser distance measUrer (Ldm) off
C
/
OFF
Press and hold the C/OFF button (f) until the LDM turns off.
aUtomatic shUt doWn
The LDM will automatically shut down if no button is pressed for 3
minutes.
to cLear a measUrement
Press the C/OFF button (f) once to clear the last measurement.
measurements
singLe distance measUring
DIST
(fig. 3, 7)
1. Press the DIST (ON) button (e) once to turn the LDM on.
2. Aim the LDM at the desired target.
Summary of Contents for DW030
