background image

19

English

 • 

FOR YOUR SAFETY: 

Registering your product will allow us to 

contact you in the unlikely event a safety notification is required 
under the Federal Consumer Safety Act.

Register online at www.dewalt.com/register.

Three Year Limited Warranty

D

E

WALT will repair, without charge, any defects due to faulty materials 

or workmanship for three years from the date of purchase. This 
warranty does not cover part failure due to normal wear or tool abuse. 
For further detail of warranty coverage and warranty repair information, 
visit www.dewalt.com or call 1-800-4-D

E

WALT (1-800-433-9258). 

This warranty does not apply to accessories or damage caused where 
repairs have been made or attempted by others. This warranty gives 
you specific legal rights and you may have other rights which vary in 
certain states or provinces.

In addition to the warranty, D

E

WALT tools are covered by our:

1 YEAR FREE SERVICE

D

E

WALT will maintain the tool and replace worn parts caused by 

normal use, for free, any time during the first year after purchase. 

2 YEARS FREE SERVICE ON D

E

WALT BATTERY PACKS

DC9071, DC9091, DC9096, DC9280, DC9360, DC9180, DCB120, 

DCB127, DCB201, DCB203 and DCB207.

3 YEARS FREE SERVICE ON D

E

WALT BATTERY PACKS

DCB200, DCB204, DCB205

D

E

WALT BATTERY PACKS

Product warranty voided if the battery pack is tampered with in any 
way. D

E

WALT is not responsible for any injury caused by tampering 

and may prosecute warranty fraud to the fullest extent permitted by 
law.

90 DAY MONEY BACK GUARANTEE

If you are not completely satisfied with the performance of your 
D

E

WALT Power Tool, Laser, or Nailer for any reason, you can return it 

within 90 days from the date of purchase with a receipt for a full refund 
– no questions asked.

LATIN AMERICA:

 This warranty does not apply to products sold 

in Latin America. For products sold in Latin America, see country 
specific warranty information contained in the packaging, call the local 
company or see website for warranty information.

FREE WARNING LABEL REPLACEMENT:

 

If your warning labels become illegible or are missing, call 
1-800-4-D

E

WALT (1-800-433-9258) for a free replacement.

Summary of Contents for DCS391B




















Reviews: