background image

7

English

WARNING:

 Burn hazard. Battery liquid may be flammable if 

exposed to spark or flame. 

The RBRC™ Seal

The RBRC™ (Rechargeable Battery Recycling
Corp oration) Seal on the nickel cadmium, nickel metal 
hydride or lithium ion batteries (or battery packs) 
indicate that the costs to recycle these batteries (or 
battery packs) at the end of their useful life have already 
been paid by D

E

WALT. In some areas, it is illegal to 

place spent nickel cadmium, nickel metal hydride or lithium ion 
batteries in the trash or municipal solid waste stream and the RBRC 
program provides an environmentally conscious alternative.
RBRC™, in cooperation with D

E

WALT and other battery users, has 

established programs in the United States and Canada to facilitate 
the collection of spent nickel cadmium, nickel metal hydride or lithium 
ion batteries. Help protect our environment and conserve natural 
resources by returning the spent nickel cadmium, nickel metal hydride 
or lithium ion batteries to an authorized D

E

WALT service center or 

to your local retailer for recycling. You may also contact your local 
recycling center for information on where to drop off the spent battery.
RBRC™ is a registered trademark of the 

Rechargeable Battery 

Recycling Corporation.

Important Safety Instructions for All 
Battery Chargers

SAVE THESE  INSTRUCTIONS:

 This manual contains important 

safety and operating instructions for battery chargers.
•  Before using the charger, read all instructions and cautionary 

markings on the charger, battery pack and product using the 
battery pack.

WARNING: 

Shock hazard. Do not allow any liquid to get inside the 

charger. Electric shock may result.

CAUTION:

 Burn hazard. To reduce the risk of injury, charge only 

D

E

WALT rechargeable battery packs. Other types of batteries may 

overheat and burst resulting in personal injury and property damage.

NOTICE:

 

Under certain conditions, with the charger plugged into the 

power supply, the charger can be shorted by foreign material. Foreign 
materials of a conductive nature, such as, but not limited to, grinding 
dust, metal chips, steel wool, aluminum foil or any buildup of metallic 
particles should be kept away from the charger cavities. Always unplug 
the charger from the power supply when there is no battery pack in the 
cavity. Unplug the charger before attempting to clean.

  DO NOT attempt to charge the battery pack with any 

chargers other than the ones in this manual.

 The charger and 

battery pack are specifically designed to work together. 

• 

These chargers are not intended for any uses other than 
charging D

E

WALT rechargeable batteries. 

Any other uses may 

result in risk of fire, electric shock or electrocution.

• 

Do not expose the charger to rain or snow.

• 

Pull by the plug rather than the cord when disconnecting 
the charger.

 This will reduce the risk of damage to the electric plug 

and cord.

• 

Make sure that the cord is located so that it will not be 
stepped on, tripped over or otherwise subjected to damage 
or stress.

• 

Do not use an extension cord unless it is absolutely 
necessary.

 Use of improper extension cord could result in risk of 

fire, electric shock or electrocution.

• 

When operating a charger outdoors, always provide a dry 
location and use an extension cord suitable for outdoor use. 

Use of a cord suitable for outdoor use reduces the risk of electric 
shock. 

Summary of Contents for DCS391B




















Reviews: