33
EnGLIsh
Charge
D
e
WALT
battery packs only with designated
D
e
WALT
chargers. Charging battery packs other
than the designated
D
e
WALT
batteries with a
D
e
WALT
charger may make them burst or lead to
other dangerous situations.
Do not incinerate the battery pack.
USE (without transport cap). Example: Wh rating
indicates 108 Wh (1 battery with 108 Wh).
TRANSPORT (with built-in transport cap). Example:
Wh rating indicates 3 x 36 Wh (3 batteries of 36 Wh).
Battery Type
The DCD470 operates on a 54 volt battery pack.
These battery packs may be used: DCB546 and DCB547.
Refer to
Technical Data
for more information.
Package Contents
The package contains:
1 Drill
1 Side handle
1 Chuck key
1 Chuck key holder
1 Li-Ion battery pack (C1, D1, L1, M1, P1, S1, T1, X1, Y1 models)
2 Li-Ion battery packs (C2, D2, L2, M2, P2, S2, T2, X2, Y2 models)
3 Li-Ion battery packs (C3, D3, L3, M3, P3, S3, T3, X3, Y3 models)
1 Instruction manual
nOTE:
Battery packs, chargers and kitboxes are not included
with N models.
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Visible radiation. Do not stare into light.
Date Code Position (Fig. A)
The date code
14
, which also includes
the year of manufacture,
is printed into the housing.
Example:
2018 XX XX
Year of Manufacture
Description (Fig. A)
WARNING:
Never modify the power tool or any part of it.
Damage or personal injury could result.
1
Battery
2
Battery release button
3
Main handle
4
Top handle
5
Side handle
6
Speed selector knob
7
Trigger switch
8
Worklight
9
Forward/reverse button
10
13 mm keyed chuck
11
Chuck key
12
E-Clutch® indicator
13
D
e
WALT
Tool Tag
mounting holes
Intended Use
The DCD470 right angle drill is designed for professional drilling
at various work sites (i.e., construction sites)
DO nOT
use under wet conditions or in the presence of
flammable liquids or gases.
These heavy-duty right angle drills are professional power tools.
DO nOT
let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
•
Young children and the infirm.
This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Torque
WARNING:
This is a high-torque drill. To reduce the risk
of serious personal injury,
ALWAYS
hold tool firmly with
both hands in the proper position for operation as shown.
Torque is the twisting action the drill produces in regards to
the rotating bit. As the drill bit meets resistance in the material
being drilled, the motor responds by adjusting the output
torque to meet the requirement up to the maximum capacity of
the motor and gear system.
Bracing the Tool (Fig. C, H)
WARNING:
To reduce the risk of serious personal injury,
ALWAYS
hold or brace the tool securely in anticipation of
a sudden reaction.
WARNING:
To reduce the risk of serious personal injury,
NEVER brace the tool against the battery pack.
With hands in the proper hand position (also refer to Fig. H),
brace the tool as shown in Figure C.
The bit rotates clockwise when the tool is in the forward
position and counterclockwise when the tool is in the reverse
position. Using proper hand position, brace the side handle
5
or tool body against a stud for better support (Fig. C).
Clutch
The DCD470 is equipped with a mechanical slip clutch. The
clutch is active when the low speed (1) is selected. When the
bit or cutter bites into the workpiece, the clutch will slip and a
