18
EngLIsh
EC-Declaration of Conformity
Machinery Directive
Demolition Hammer
D25902, D25951
D
e
WALT
declares that these products described under
Technical Data
are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-6:2010.
2000/14/EC, Electrical concrete breaker (hand-held), m ≤ 15 kg,
Annex VIII, TÜV Rheinland LGA Products GmbH (0197), D-90431
Nürnberg, Germany, Notified Body ID No.: 0197
Level of sound power according to 2000/14/EC (Article 12,
Annex III, No. 10; m ≤ 15 kg):
L
WA
(measured sound power level)
D25902
dB(A)
100
D25951
dB(A)
101
L
WA
(guaranteed sound power level)
D25902
dB(A)
105
D25951
dB(A)
105
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
D
e
WALT
at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
D
e
WALT
.
Markus Rompel
Vice President of Engineering PTE Europe
D
e
WALT
, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
25.10.2018
WARNING:
To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER:
Indicates an imminently hazardous
situation which, if not avoided,
will
result in
death or
serious injury
.
WARNING:
Indicates a potentially hazardous situation
which, if not avoided,
could
result in
death or
serious injury
.
Congratulations!
You have chosen a
D
e
WALT
tool. Years of experience, thorough
product development and innovation make
D
e
WALT
one of the
most reliable partners for professional power tool users.
Technical Data
D25902
D25951
Voltage
V
AC
230
230
UK & Ireland
V
AC
230/115
230/115
Type
1
1
Frequency
Hz
50
50
Power output
W
1550
1600
Impact rate
min
-1
1050–2100
1620
Single impact energy (EPTA 05/2009)
J
19
24
Tool holder
SDS MAX
SDS MAX
Chisel positions
12
12
Weight
kg
10.5
13.3
Noise values and/or vibration values (triax vector sum) according to
EN60745‑2‑6:
L
PA
(emission sound pressure level)
dB(A)
89
90
L
WA
(sound power level)
dB(A)
100
101
K (uncertainty for the given sound
level)
dB(A)
3
2
Chiselling
Vibration emission value a
h,Cheq
=
m/s
2
7.5
8.8
Uncertainty K =
m/s
2
1.5
1.5
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN60745 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.
WARNING:
The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
English (original instructions)
DEMOLITION HAMMER
D25902, D25951
