ENGLISH
21
WARNING:
Use only D
E
WALT
replacement parts.
Replacing the Dust Brush (fi g. 10)
WARNING:
Wear approved eye
protection and approved dust mask
when performing this procedure.
The dust brush will wear during use and will need to
be replaced.
1. Remove the circlip (t) using a pair of circlip
pliers.
2. Replace the dust brush (j).
3. Refit the circlip.
Cleaning
WARNING:
Blow dirt and dust out of
the main housing with dry air as often as
dirt is seen collecting in and around the
air vents. Wear approved eye protection
and approved dust mask when
performing this procedure.
WARNING:
Never use solvents or
other harsh chemicals for cleaning the
non-metallic parts of the tool. These
chemicals may weaken the materials
used in these parts. Use a cloth
dampened only with water and mild
soap. Never let any liquid get inside the
tool; never immerse any part of the tool
into a liquid.
Cleaning the Dust Collector
WARNING:
Do not use a brush to
clean the dust collector or filter.
During intensive use the dust collector becomes
clogged with dust. Refer to
Emptying the Dust
Collector
under
Operation
.
When the filter in the dust collector is worn take the
extraction system to an authorised D
E
WALT repair
agent to replace it.
IMPORTANT:
The dust collector should be replaced
after every 100–120 cycles of use.
Optional Accessories
WARNING:
Since accessories, other
than those offered by D
E
WALT, have
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only D
E
WALT, recommended
accessories should be used with this
product.
Consult your dealer for further information on the
appropriate accessories.
Protecting the Environment
Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your D
E
WALT product
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
D
E
WALT provides a facility for the collection and
recycling of D
E
WALT products once they have
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
D
E
WALT office at the address indicated in this
manual. Alternatively, a list of authorised D
E
WALT
repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com
.
Summary of Contents for D25302DH
