ENGLISH
19
• Do not use to pick up flammable or combustible
liquids, such as gasoline, or use in areas where
they may be present.
Residual Risks
The following risks are inherent to the use of the
dust extraction system:
– injuries caused by touching the rotating parts or
hot parts of the tool
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
– Impairment of hearing.
– Risk of squeezing fingers when changing the
accessory.
– Health hazards caused by breathing dust
developed when working in concrete and/or
masonry.
Markings on Dust Extraction System
The following pictograms are shown on the tool:
Read instruction manual before use.
DATE CODE POSITION
The Date Code, which also includes
year of
manufacture, is printed into the housing surface that
forms the mounting joint between tool and dust box.
Example:
2014 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Dust extraction system:
1
Side
handle
1 Dust extraction head/dust brush
1 Telescope with depth adjustment slide
1
Dust
hose
1 Instruction manual
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
WARNING:
Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. Extractor base
b. Base release button
c. Dust collector
d. Dust collector release button
e. Dust hose
f.
Telescope
g. Depth adjustment button
h. Length adjustment button
i. Dust extraction head
j.
Dust
brush
k. Side
handle
INTENDED USE
Your dust extraction system D25302DH has been
designed for the extraction of dust in professional
hammerdrilling in masonry or concrete, and with
solid drill bits mounted to the power tool. DO NOT
use for drilling plastic, wood or metal.
This dust extraction system will fit D
E
WALT 28V
and 36V cordless SDS Plus
®
hammers. For more
information about D
E
WALT power tools compatible
with this attachment, please contact your local
dealer, refer to the addresses at the back of the
manual or visit
www.dewalt.eu
.
DO NOT
use under wet conditions or in presence of
flammable liquids or gases.
The dust extraction system is an attachment for use
with professional power tools.
DO NOT
let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
Electrical Safety
The electric motor has been designed for one
voltage only. Always check that the battery pack
voltage corresponds to the voltage on the rating
plate. Also make sure that the voltage of your
charger corresponds to that of your mains.
Your D
E
WALT charger is double insulated
in accordance with EN 60335; therefore
no earth wire is required.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D
E
WALT service organization.
Summary of Contents for D25302DH
