8
FOREWORD
Model 513
Lock Mortiser permits builders and contractors to quickly cut
true, accurate mortises for door box locks.
Model 517
Lock Face Templet allows quick and economical routing for lock
faces on doors after the mortise cut for the lock itself has been completed.
FUNCTIONAL DESCRIPTION
ASSEMBLY
Fig. 1
* Four height rod sections
* Two cutting bits
* Open end wrench
* Two flat washers
* Two cap screws
* Allen Wrench
* Motor unit
* Mortiser frame
CARTON CONTENTS
STANDARD EQUIPMENT
With the mortiser, the four sections of the height rod (A), and two bits (B) are
furnished. See Fig. 1.
ASSEMBLY TOOLS REQUIRED
- Allen wrench (supplied)
ASSEMBLY TIME ESTIMATE
15 to 30 minutes
ASSEMBLY OF BASE UNIT
The unit is shipped with the crank handle disassembled.
Remove bolt and washer (B and C) Fig. 2. Place crank handle (D) onto crank
shaft (A) with wooden knob facing outward and “D”-shaped hole in handle
aligned with flat on shaft. Place bolt (C) through washer (B) and thread into
shaft (A). Tighten securely.
A
B
