Configuration
devolo G3-PLC Modem 500k
30
trying to send a data packet. At this point, the modem first looks for an alternative
route.
Internal event meters
These event counters are used to monitor the system. Events such as resetting or re-
starting the modem after a software update or a power failure are recorded in the
Re-
start
or
Process start
counter.
4.4.2Topology
You can view the connected modems in the topology overview.
Each device is assigned an individual
node ID
of up to 4 digits when it pairs with the
PAN coordinator. The node ID of the PAN coordinator itself is always 0. The node ID
is specified so that devices can be identified.
Fig. 5: PAN coordinator status
Summary of Contents for G3-PLC Modem 500k
Page 1: ...devolo G3 PLC Modem 500k...
Page 2: ...G3 PLC Modem 500k...
