|
Connection and installation
15
|
dsl+ 1100 WLAN
|
햷
Plug the included WLAN USB stick into a USB port of your desktop or note-
book computer. Boot the connected computer. The 'WLAN' LED on the
router should now be lit.
For further information on installing the WLAN USB stick, please see 'Installing
the WLAN USB stick in Windows'.
햸
Use the included network cable to connect the 'ETH' port of your dsl
+
1100
WLAN to the network port of your computer. Boot the connected computer.
햹
To configure the WLAN and Internet access, continue in the following chap-
ter under 'Setting up the WLAN and Internet access with the configuration
wizard '.
Installing the WLAN USB stick in Windows
Use the WLAN USB stick to connect a desktop or notebook computer to the
WLAN. The
WECT
function of the dsl
+
1100 WLAN automatically configures
WPA2-encrypted connections between the dsl
+
1100 WLAN and computers
using the included WLAN USB stick and running Windows 2000 or Windows XP
(32-bit).
With the
WECT
function, you are selecting a special devolo WLAN configura-
tion that uses the best settings for a WLAN network with the dsl
+
1100 WLAN
and the WLAN USB stick. To connect to other WLAN networks (e.g. hotspots),
configure your WLAN settings in Windows.
Windows XP lets you switch back and forth between configurations as neces-
sary. Click the devolo arch in the system tray in the bottom right-hand corner of
your display and select the appropriate configuration.
Summary of Contents for dsl+1100
Page 1: ...dsl 1100 WLAN...
