Devolo dLAN TV SAT Starter Set, Manual

Page: 55 / 85

54 TV and radio programme
devolo dLAN TV SAT Starter Set
Channel List Update
If you have selected the Channel List Update during
the First Time installation , you can update the chan-
nel list using this setting.
Manual channel scan
This is where you manually enter all the details of the
desired channel.
쎲
You select the satellite name from the selection list
in the
Satellite
field.
쎲
You enter the frequency in the Frequency field
using number keys 0 to 9.
쎲
You select the polarisation from the selection list
in the
Polarisation field.
쎲
You enter the symbol rate in the
Symbol rate
field
using number keys 0 to 9.
쎲
You select the network number from the selection
list in the
Network search field.
쎲
Channel scanning:
쑗
Yes : after one transponder has been set, the
parameters of other transponders are
retrieved from the NIT table (
N
etwork
I
nfor-
mation T able) and the other transponders set.
Once the transponder frequency has been en-
tered, the signal level and quality are dis-
played on the bars at the bottom of the
screen. The
Signal quality
bar shows the re-
ception quality. The
Signal level
bar shows
the strength of the satellite signal.
You confirm all entries with OK .