Devolo dLAN TV SAT Starter Set, Manual

Page: 24 / 85

Initial use 23
devolo dLAN TV SAT Starter Set
3.5 Indicators and connections of
the dLAN adapter
The dLAN adapter has a monitoring light (LED), two
network jacks and an encryption button.
Monitoring light
The monitoring light (LED) shows all of the statuses for
the dLAN adapter by illuminating and/or flashing in
different ways:
쎲
The LED flashes at uniform intervals (of 2 s) if
the dLAN adapter is connected to the mains sup-
ply but there is no dLAN connection .
쎲
The LED lights up if the dLAN adapter is ready
to operate
and there is a
dLAN connection
.
쎲
The LED flashes quickly if the encryption process
( pairing ) is being performed in the dLAN net-
work.
쎲
The LED flashes at irregular intervals (0.5 s/
2 s) if the dLAN adapter is in
PowerSave mode
.
Network jacks
This is where you connect the dLAN adapter to a com-
puter and/or other network device using commercially
available network cables.
Encryption button
Data encryption at the press of a button; for informa-
tion on how the encryption button functions, refer to
Chapter
7 dLAN network or the respective manual
on our Internet site: www.devolo.com .
Integrated electrical socket
Plug the mains adapter provided with the
dLAN TV SAT to IP Receiver into the socket on the
dLAN adapter. The integrated mains filter eliminates
any noise of connected devices and significantly im-
proves data transmission in the home network.
Please note that all dLAN devices to be
connected to your network are also
connected to your household electrical
wiring. A dLAN device switches into
standby mode after a short time if no
network device (such as a computer)
connected to the network interface is
switched on. In Standby mode, the
dLAN device cannot be accessed via
the power supply grid. As soon as the
network device (e.g. computer) con-
nected to the network interface is
switched on again, your dLAN device
can also be reached again via the elec-
trical wiring.