High-performance automatic gun
AGMD
1-1-AGMD-514&515-E-002-1
18
5.4 Cleaning gun parts
After the gun parts have been disassembled, first clean them and then inspect their
condition.
Note!
The way in which parts of the gun get dirty can provide information about the
cause of failures of the high-performance automatic spray gun AGMD.
Caution!
Danger of damage!
Individual components may be destroyed or solvent could get into the air channels.
Do not
immerse the high-performance automatic spray gun AGMD in solvent.
The following are required to clean the high-performance automatic spray gun AGMD:
suitable solvent
an earthed solvent supply
cleaning brushes
1. Clean the gun parts with a brush and a suitable solvent and blow dry.
2. Clean the air and material feedthroughs with a small round cleaning brush, a pipe cleaner
saturated with solvent, or some similar item.
5.5 Checking components
Caution!
Danger of damage!
Never install defective components in the high-performance automatic spray gun
AGMD.
Use only original parts.
1. Before installing the high-performance automatic spray gun AGMD, check all components
for damage.
2. Replace damaged components with new ones.
