Emulator
The emulator provides a side-screen displaying the current virtual-stick/switch states as
well as the Channel output that would be received by the servos
The emulator controls are as follows (based an an English keyboard):
Button
Action
q/a
Left-Vertical stick (Throttle in mode 2)
Q/A
Left-Vertical trim
w/s
Left-Horizontal stick (Rudder in mode 2)
W/S
Left-Horizontal trim
e/d
Right-Vertical stick (Elevator in mode 2)
E/D
Right-Vertical trim
r/f
Right-Horizontal stick (Aileron in mode 2)
R/F
Right-Horizontal trim
z
Gear
x
Rudder Dual-Rate switch
c
Elevator Dual-Rate switch
v
Aileron Dual-Rate switch
b
Mix 0/1/2 switch
n
FMode 0/1/2 switch
\
Power off
Left-arrow
Left
Right-arrow
Right
Up-arrow
Up
Down-arrow Down
Enter
Ent
Escape
Exit
About Deviation Page
The Deviation release version can be accessed by selecting ‘About Deviation’ from the
main menu.
USB Page
The USB page cab be accessed by selecting ‘USB’ from the main menu. USB mode can
then be toggled on/off to enable access to the transmitter’s file-system.
Note that doing
so should never be done while the model is bound, as USB will disrupt signal
transmission!
Page | 10
