Instruction Manual
8
1.
The boiler is fitted with a control panel (illustrated in Fig. 2.2.1.3) possessing a display that continuously provides information
on the operating status of the boiler. The system’s parameters, e.g., temperature set points are easy to adjust and configure.
Any operational problems are immediately signalled by the display and, in certain cases will be corrected automatically.
1
Boiler function selection button/switch
2
Temperature selector (C.H. or DHW)
3
Heating water, domestic water, and static
pressure and temperature display with error
codes diagnostic
4
Control panel Kt.
K1 ON/OFF, reset
A
Central heating system and a storage tank
supply
B
Domestic cold water
C
Gas
D
Domestic hot water
E
Return from central heating system and
from a storage tank
Fig .2.2.1.3. Scheme of boiler operation
for Australia and New Zealand please refer to settings in Table 4.3.2.1 on p21
