devention DEVO-12 User Manual Download Page 16

Page: 16 / 239

User Manual for DEVO-12

Page 16 of 238

Throttle

Rudder

Aileron

Elevator

8.0 Switches between left-hand and right-hand

throttles

The throttle switches between the left hand and right hand will be successful if both

the MECHANICAL switch and ELECTRONIC switch are finished, separately. Below

are the methods for switching.

8.1 Right-hand throttle switched to left-hand throttle

1) MECHANICAL switch

Open the battery compartment cover in the rear of your DEVO-12. Push rightwards

and take out the battery pack.

Remove the left lateral, right lateral, and rear non-slipping blocks, respectively.

Summary of Contents for DEVO-12
















































































































































































































































Search results

Summary of Contents for DEVO-12

Reviews:

Related manuals for DEVO-12

Brands by name

Popular brands

devention DEVO-12, User Manual

Search results

Summary of Contents for DEVO-12

Reviews:

Related manuals for DEVO-12

Brands by name

Popular brands