User Manual for DEVO-12
Page 137 of 238
lower curves will being changed at the
same time.
If touch this mark, upper or lower curve
will being changed.
4) Exponential adjustment
It is possible to adjust the exponential output value of the servo at that point , which is
set up in step “2) Position selection”, by touching the navigation mark of Exponential.
If touching the navigation mark for just one item to amend the dual rate value, the dual
rate of the corresponding servo will be changed in one direction, while the curve will
being changed in one direction at the right graph.
If touching the navigation mark for both items to amend the dual rate value, the dual
rate of the corresponding servo will be changed while the curve will being changed at
the same time, shown at the right graph. The default setting is Line.
Then touch this mark
to return to the interface of Dual Rate and Exponential.
5) Automatic setting
Under working with Flight Mode, it is possible to switch the dual rate and exponential,
which are set in above 3) Dual Rate adjustment and 4) Exponential adjustment,
respectively.
Summary of Contents for DEVO-12
Page 239: ...G G G G G G G G G G G...
