Develop SU-502 User Manual Download

Page: 135 / 170

Using internet faxing operations

SU-502

6-11

6.2

Specifying the destination using programmed dialing

The only transmission functions that can be used when an e-mail address is
selected are broadcast transmission and timer transmission.

For information on specifying these settings, refer to the manual provided
with the machine.

6.3

Sending a document to multiple destinations (Broad-
cast transmission)

The same scan data can be sent to multiple destinations.

The maximum number of destinations that can be specified at one time is
231. However, only a maximum of 16 destinations can be specified by enter-
ing the information directly.

Note

A recipient can be specified by either its e-mail address or fax number.

The results of all the transmissions can be checked in the transmission
result report that is printed after the transmission is finished.

Summary of Contents for SU-502











































































































































































Search results

Summary of Contents for SU-502

Reviews:

Related manuals for SU-502

Brands by name

Popular brands

Develop SU-502, User Manual

Search results

Summary of Contents for SU-502

Reviews:

Related manuals for SU-502

Brands by name

Popular brands