Develop ineo+ 3350 Quick Manual Download Page 57

Page: 57 / 64

5-19

ineo+ 3350/3850

Printing a file stored on USB memory

5.5

Printing a file stored on USB memory

Supported USB memory devices

USB memory devices that have the following specifications can be connected to this machine.

Tips

Note the following points when connecting a USB memory device to this machine.

Use the USB connector on the side that is near the

Control Panel

Do not disconnect the USB memory device while saving a file to the USB memory or printing a file in
the USB memory.

Use only a USB memory device on this machine. Do not use other USB devices (such as a hard disk
unit or USB switching hub).

Do not connect or disconnect the USB memory device when the hourglass is displayed in the

Control

Panel

while this machine is active.

Do not disconnect the USB memory device directly after connecting it.

How to print

Connect a USB memory device to the USB port of this machine.

Tap [Document Print/Delete].

Tap [External Memory].

Item

Specifications

Supported media

USB memory device (USB 2.0 supported)

File system

FAT32

File Type

PDF, Compact PDF, JPEG, TIFF, XPS, Compact XPS, OpenXPS, OOXML
(.docx/.xlsx/.pptx), and PPML (.ppml/.vdx/.zip)

Summary of Contents for ineo+ 3350

































































Search results

Summary of Contents for ineo+ 3350

Reviews:

Related manuals for ineo+ 3350

Brands by name

Popular brands

Develop ineo+ 3350, Quick Manual

Search results

Summary of Contents for ineo+ 3350

Reviews:

Related manuals for ineo+ 3350

Brands by name

Popular brands