ineo+ 353/253/203
1-85
Setup items by operation
1
1.30.3
SNMP Setting
In Administrator mode of Web Connection, select the Network tab - "SNMP Setting".
Specify the following settings.
Item
Definition
Prior confirmation
IPX Setting
Select "ON".
Ethernet Frame Type
Specify the frame type to be used.
Frame type
Item
Definition
Prior confirmation
SNMP
Specifies whether to use the SNMP. If yes, specify whether
to use SNMP v1/v2 (IP), SNMP v3, and SNMP v1 (IPX).
SNMP v1 (IPX) can be specified only when IPX is enabled.
Protocol to be used
(TCP/IP or IPX/SPX)
UDP Port Setting
Default setting: 161
Specify the UDP port number.
SNMP v1/v2c Setting
Specify settings for using SNMP v1/v2c.
Read Community Name
Specify the community name to be used for scanning (up to
15 characters).
Write Community Name
Specify the community name to be used for reading and
writing (up to 15 characters).
SNMP v3 Setting
Specify settings for SNMP v3.
Context Name
Specify the context name (up to 63 characters).
Summary of Contents for ineo+ 203
