Develco KEYZB-110, Technical Manual, Page: 9 / 22

Keypad - KEYZB-110 – Technical manual
Develco Products A/S Tangen 6 http://develcoproducts.com
DK-8200 Aarhus N info@develcoproducts.com
9
0x01 Identify Query none M 0x01
The identify cluster has 1 command as client.
Id# Name Payload Man/Opt Relevance and ref.
0x00 Identify Query Response Uint16 - Identify Time (seconds) M 0x00
4.2 IAS ACE Device – EP 0x2C
4.2.1 IAS Zone - Cluster id 0x0500
The IAS Zone cluster is described in ZigBee Cluster Library Specification.
4.2.1.1 Attribute
Id# Name Type Man/Opt Relevance and ref.
0x0000 Zone State
8-bit
Enumeration
M
0x0001 Zone Type
16-bit
Enumeration
M
Hard coded to
Keypad
0x0002
Zone Status Uint16
M
The following bits are
supported:
Bit2: Tamper
Bit3: Battery
Bit4: Supervision reports
Bit5: Restore reports
0x0010
IAS CIE Address
Valid 64-bit
IEEE address
M
0x0011
ZoneID Uint8
M
0x8000
Zone Status Interval Uint16
O Default 300 sec
4.2.1.1.1 Zone State
The device will automatically start to scan the network for an IAS Zone client in a predefine interval. When the
client is found it will automatically attempt to enrol. When it has successfully enrolled the Zone Status command
is send to the IAS Zone client.
The attribute value will change from not enrolled (0x00) to Enrolled (0x01).
4.2.1.1.2 IAS CIE Address
Attribute specifies the address that commands generated by the server shall be sent to.