Page
3
Ⅰ
.Introduction
：
EF Series Fryer is a new kind of catering fryer. Made from good quality stainless steel which is stylish,
durable and easy to clean. The products are equipped with highly reliable components so that they are
energy-saving and safe.
The featured design of a removable fryer head offers convenience, practicality and cleans easily.
The EF series provides a thermostat function, for quick and constant temperature control.
II.Technical Specification:
Ⅲ
.Operating Instruction:
Before use please check whether the voltage of power supply is in conformity with your power supply.
Operation Step:
1.
Fill the oil tank to the correct level on your appliance.
2.
Connect with fryer’s power supply and green power indicator will come on.
3.
Adjust temperature control to a suitable temperature in a clockwise manner.
4.
When the yellow indicator is on the heating element will begin to heat.
5.
When oil temperature reaches the required temperature the temperature control will cut the power-off, the
yellow indicator will turn off and the heating element stop working. When oil temperature drops, the
temperature control connects power supply automatically, the yellow indicator turns on, and the element heat
again. This procedure is repeated to ensure oil temperature stays set at the desired temperature.
6.
There is a frying basket provided with your fryer. When you finish frying the food there is a special hook to drain
away any excess oil for better quality frying.
7.
The cover is designed to keep the oil clean and warm. Pay attention to make sure that there is no water on the
cover before you close cover.
8.
After you finish frying be sure to turn your appliance off.
9.
The fryer is equipped with safety switch. When you lift up the electric control box and the heating element is out
from oil, the safety switch will take action the cut off power.
10. The temperature limited device will operate and cut off the heating element when the oil temperature is too high
while using. Please check the machine after the power is cut off and the oil is cooled down to room temperature. Then
open the cover of the reset button behind the control box and press the reset button to restart the machine.
IV.
Maintenance:
After use, you should use a wet cloth to clean. DO NOT IMMERSE IN WATER. Please ensure you remove
all oil covered parts carefully and consistently. This will prolong the life of your fryer.
Model
Voltage
Input Power
(kW)
Capacity
(L)
Capacity Of
Pouring Into
Oil(L)
Dimension
(mm)
N.W.
(kg)
CDF-DR20-D
OUBLE-SI
220V~240V/
50HZ/60H
Z
3+3
10+10
8+8
570X460X325
14
