Devantech dS1242 User Manual Download Page 4

Page: 4 / 63

dS1242

User Manual v4.10

Documentation history

v4.01

Major update to the underlying dScript, now with functions and local variables.

Added “From Address” for easymail emails.

v4.02

Bug fixes for the underlying dScript

v4.03

Editor update, added support for multiple editor tabs.
Compiler update, added support for multiple files in project.

Compiler update, added support for #ifdef, #else, #endif

v4.04

TCP server socket now transmits keepalives when connections become dormant
for 10 seconds. 6 unacknowledged packets at 10 second intervals will result in

port closure.

V4.05

Added phone app support (IO Network 2 on the App stores). Fixed bug that
caused intermittent module not found error on firmware update.

V4.06

Added system reboot button to config status screen.

dScript updated to support dS2832. See dScript-v4.06 manual.

V4.07

Added new features:
Ping

Used to ping other machines to check if responding.

Sequencer

Added a 120 step, 12 output sequencer

v4.08

Added display of MAC address to network configuration page.
Bugfix – NTP (Real time clock) startup failed under some circumstances

Renamed command “counters” to “setcounters”.

V4.09

Added 3 new commands to Binary and AES Binary command set, to
control all relays in one command. Set all, set selected and clear selected.

V4.10

Webpage security settings now on Network page for compatibility with other

modules. The new dSx support for dS modules which have powered
RS485 ports is not applicable to dS1242, use dS2242 instead.

V4.10.002

Bugfix – Timer threads operated with incorrect timing.

Follow instructions on page 51 to update system firmware.

Note:

If you have a custom app based on app-dSxxxx-v4-07 or earlier, you will need to re-

name the “counters” command to “setcounters” for it to compile with this version.

Devantech Ltd.

www.robot-electronics.co.uk

Summary of Contents for dS1242





























































Search results

Summary of Contents for dS1242

Reviews:

Brands by name

Popular brands

Devantech dS1242, User Manual

Search results

Summary of Contents for dS1242

Reviews:

Brands by name

Popular brands