DEVA SmartGen 6.0 Maintenance And Operation Instruction Manual Download Page 92

Page: 92 / 102

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: +359 56 820027, Fax: +359 56 836700

E-mail: [email protected] ,Web: www.devabroadcast.com

- 92 -

EON

Enhanced Other Networks information: This feature can be used to update the information

stored in a receiver about program services other than the one received. The alternative frequencies-

PS name, Traffic Program and Traffic Announcement identification as well as Program Type and

Program Item Number information can be transmitted for each other service. The relation to the

corresponding program is established by means of the relevant Program Identification. Linkage

information, consisting of four data elements, provides the means by which several program

services may be treated by the receiver as a single service during times a common program is

carried. Linkage information also provides a mechanism to signal an extended set of related

services.

EWS

Emergency Warning System: The EWS is intended to provide coding for warning messages.

These messages will be broadcasted only in case of emergency and will be evaluated by special

receivers.

In House application: This refers to data to be decoded only by the operator. Some examples

noted are identification of transmission origin, remote switching of networks and paging of staff.

The applications of coding may be decided by each operator itself.

M/S

Music / Speech Switch: This flag simply indicates whether music or speech is the primary

broadcast programming. The purpose of this function is not well explained in the respective

Standards; hence it comes as no surprise that it is not widely used.

ODA

Open Data Applications: The Open Data Applications feature allows data applications, not

previously specified in EN 50067, to be conveyed in a number of allocated groups in an RDS

transmission. The allocated groups are indicated by using type 3A group which is used to identify

to a receiver the data application in use in accordance with the registration details in the EBU/RDS

Forum - Open Data Applications Directory and the NRSC Open Data Applications Directory.

Program Identification: This block of data identifies the broadcast station with a hexadecimal

numerical code, which becomes the “digital signature” of the station. The code is assigned by the

broadcasting authorities in most countries, but in the US it is calculated from a numerical encoding

of station call letters. The receiver processes the PI code to assist automatic tuning features (station

memories), and to prevent false switching to alternative frequencies that might be shared by

broadcasters in nearby regions.

PIN

Program Item Number: The code enables the designed to use this feature receivers and recorders

to respond to the preselected by the user program item(s).This feature is used via scheduled program

time, to which in order to avoid ambiguity is added the day of the month.

Summary of Contents for SmartGen 6.0







































































































Search results

Summary of Contents for SmartGen 6.0

Reviews:

Related manuals for SmartGen 6.0

Brands by name

Popular brands

DEVA SmartGen 6.0, Maintenance And Operation Instruction Manual

Search results

Summary of Contents for SmartGen 6.0

Reviews:

Related manuals for SmartGen 6.0

Brands by name

Popular brands