DEVA SmartGen 6.0 Maintenance And Operation Instruction Manual Download Page 18

Page: 18 / 102

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: +359 56 820027, Fax: +359 56 836700

E-mail: [email protected] ,Web: www.devabroadcast.com

- 18 -

Before you start

SAFETY WARNING

Always observe the safety precautions!

The following safety precautions provide important information intended to prevent personal

injury to the operator and others, and property damage.

• The servicing of electronic equipment should be performed only by qualified personnel

only;

•

Before removing the covers, SmartGen 6.0 must be switched off and the power cable

unplugged;

•

Never touch the wires or the electrical circuits;

•

Use insulated tools only;

•

Never touch the metal semiconductor. It might carry high voltages;

•

For removing and installing electronic components, follow the recommendations for

handling MOS components.

Summary of Contents for SmartGen 6.0







































































































Search results

Summary of Contents for SmartGen 6.0

Reviews:

Related manuals for SmartGen 6.0

Brands by name

Popular brands

DEVA SmartGen 6.0, Maintenance And Operation Instruction Manual

Search results

Summary of Contents for SmartGen 6.0

Reviews:

Related manuals for SmartGen 6.0

Brands by name

Popular brands