DEVA DB4000 Maintenance And Operation Instruction Manual Download Page 7

Page: 7 / 90

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria

Tel: +359 56/820027, Fax: +359 56/836700

E-mail: [email protected]

Web: www.devabroadcast.com

- 7 -

General Information

DB4000 Server System is the most cost effective system for permanent monitoring of the

quality and continuity of up to 50 FM Radio Stations with innovative features such as TCP/IP

connectivity, audio streaming and automatic alerts on out of predefined ranges in regards with

ITU-R. In case of any faults in the transmission the maintenance staff will be immediately alerted

via E-mail or SMS which allows the technicians to restore a normal service as soon as possible.

This tool enhances the radio stations’ quality control management.

DB4000 Server System allows you through its TCP/IP and GSM Connectivity to monitor all

the RDS/RBDS and some other signal parameters from anywhere. You can easily receive the

channel status or listen to the audio from anywhere, using your mobile phone. You can listen to,

skim and record the audio from any station.

DB4000 Server System enables you to monitor your own frequency continuously and at the

same time to be informed about your neighboring stations. The included PC software allows you

to control unlimited number of field installed units, to observe from the monitoring sites all the

parameters and measurement values of your network. DB4000 Server System is a total control

solution for remote monitoring networks. The map interface enables getting immediate and clear

view of the monitoring location or the whole network. Due to the universal cartographic interface

any kind of maps can be used. The user can access the equipment and the alarm directly from the

map just by a click on the desired location.

DB4000’s Server System is the best solution for the management of multi-site remote DB4000

devices. It is a server-based system that can manage alarms, measurements and data from the field

units. The controlling software offers a very intuitive interface to create schedules for full control

of single or big number of monitored radio stations.

The Band Analyzer function presents an overview of all the FM parameters together with the

RF signal strength of the station. The Band Scanning is possible within FM band limits. The

generated spectrum diagram shows the RF Level vs. the Frequency.

The Deva Broadcast’s DB4000 Server System is a superb controlling system, a solution

designed as a powerful tool for permanent off-air monitoring of your stations.

Our product DB4000 Server System is a powerful monitoring system, built on our long-standing

expertise in the broadcasting equipment industry. We have created this product in the spirit of

innovation and the latest technologies. This is a very important project to us, developed to meet the

needs of the most demanding professional radio broadcasting operators and regulatory authorities.

Summary of Contents for DB4000



























































































Search results

Summary of Contents for DB4000

Reviews:

Related manuals for DB4000

Brands by name

Popular brands

DEVA DB4000, Maintenance And Operation Instruction Manual

Search results

Summary of Contents for DB4000

Reviews:

Related manuals for DB4000

Brands by name

Popular brands