65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56/820027, Fax: +359 56/836700
E-mail: [email protected]
Web: www.devabroadcast.com
- 13 -
Connecting of DB90-TX
ANALOG AUDIO INPUTS
Using a cable ending with two standard XLR connectors connect the analog signal source to the
analog audio inputs of DB9000-TX.
WARNING:
Do not exceed maximum input level. This may permanently damage the device.
DIGITAL AUDIO INPUT
Using a cable ending with a standard XLR connectors connect the AES/EBU signal source to
the digital audio input of DB9000-TX.
NOTE:
As only one input can be managed by the encoder at certain point of time, please select
the preferred signal source input – either analog or digital one. Selecting the preferred input can be
performed under CONFIGURATION menu (see “Audio Settings” on page 19).
LAN PORT
For normal operation it is necessary the encoder to be connected to a local network or Internet
by cable with RJ-45 connector.
RS-232 COM PORT
Using standart DB-9 cable connect DB9000-TX to any RS-232 compatible equipment.
