
Customer Documentation DEV 2161, DEV 2162, DEV 2165
Copyright DEV Systemtechnik GmbH 2011-2017
5
A splitter unit consists of the common input port (
C
) and for the DEV 2161 of
four (
1…4
), for the DEV 2162 of eight (
1…8
), and for the DEV 2165 of
sixteen (
1…16
) output ports. A green power LED (
P
) is provided to indicate
that the splitter unit is supplied with power. A splitter unit is capable to deliver
LNB power (or bias) to the common input port. The bias (or LNB power)
push button (
S
) is used to turn on or off the LNB power (or bias) supply. A
ballpoint pen is recommended to operate the push button. If the LNB power
supply is turned off, the bias (or LNB power) LED (
B
) is off. If the LNB power
supply is turned on the LED is green.
3.1.2
Additional Splitter Unit Options
By default a DEV 216x is equipped with a single splitter unit.
By ordering the corresponding number of Option 30 for the DEV 2161 or of
Option 31 for the DEV 2162, the products are delivered with one to three
additional splitter units.
By ordering Option 32 for the DEV 2165, the product is delivered with a
second splitter unit.
3.2
PRODUCT DRAWINGS
The layout of the different products is almost identical. In the following, the
DEV 2161, the DEV 2162, and the DEV 2165 are shown in their maximum
configuration, i.e. with four (or two) splitter units installed. The appearance of
smaller configurations can be easily derived from these illustrations.
3.2.1
DEV 2161 with 3 * Option 30
Front View:
1 :4 A c tiv e L -B a n d S p litte r
D E V 2 1 6 1
Rear View:
B ia s
B ia s
B ia s
B ia s
P w r
P w r
P w r
P w r
1 .C
1 .1
1 .2
1 .3
1 .4
1 .5
1 .6
1 .7
1 .8
3 .C
3 .1
3 .2
3 .3
3 .4
3 .5
3 .6
3 .7
3 .8
2 .C
2 .1
2 .2
2 .3
2 .4
2 .5
2 .6
2 .7
2 .8
4 .C
4 .1
4 .2
4 .3
4 .4
4 .5
4 .6
4 .7
4 .8
G
C
L
E
1
P
3
2
4
E th e rn e t
+
1 8 V D C
-
5 0 V A
G
Grounding bolt
P
DC power inlet
C
Power cable support fixture
L
Serial number label
E
Fixture for Ethernet connector (not equipped for this type of product)
3
Splitter unit 3 (equipped only with 2 * (or more) Option 30)
1
Splitter unit 1 (always equipped)
4
Splitter unit 4 (equipped only with 3 * Option 30)
2
Splitter unit 2 (equipped only with 1 * (or more) Option 30)