DSE F501-300 (Rev 06/28/19)
Page 2 of 15
This kit features a seven speed wiper system with five delays, low speed, and high speed. The
new pitman arm, included in the kit, connects directly to your existing wiper linkage. A rotary
switch is also included, along with a complete wiring harness.
This kit does feature a washer pump option as the wiper switch does have a push button
function. The wiring harness/control module is equipped with a power and ground wire to install
an inline electric washer pump. Detroit Speed does offer a washer pump kit available as part
number 121102.
Hardware Kit Checklist
–
Detroit Speed 1973-83 C10 Wiper Kit
Part Number
Description
Quantity Check
9312209
1973-74 C10 Hardware Bag
1
9312206
Wiper Switch Adapter Assembly
1
9912060
1-
1/4” Firewall Grommet
1
9912244
Billet Aluminum Wiper Switch Knob
1
9912044
3/8” AN Stainless
Steel Washer
1
950054FS
10-
24 x 3/4”L Button Head Screw
3
980096FS
5/16”
-
18 x 1”L Hex Head Flange Bolt
1
970043FS
5/16” SAE Washer
1
960033FS
5/16”
-18 Nylock Nut
1
9312212
1975-83 C10 Hardware Bag
1
9312210
Wiper Switch LED Light Box Assembly
1
9912365
Acrylic Wiper Cover Plate
1
9912367
LED Dimmer
1
9912364
Pre-Wired White LED
1
9912366
2-Wire Lever Terminal Block
4
9912060
1-
1/4” Firewall Grommet
1
9912244
Billet Aluminum Wiper Switch Knob
1
950128FS
No. 8 x 5/8”L
Sheet Metal Screw
2
950054FS
10-
24 x 3/4”L Button Head Screw
3
980096FS
5/16”
-
18 x 1”L Hex Head Flange Bolt
1
970043FS
5/16” SAE Washer
1
960033FS
5/16”
-18 Nylock Nut
1
Installation Instructions:
1.
Before beginning, please ensure that the parts included with your kit match the parts list
above. E
nsure that the factory wiper system is in its “Parked” position.
Disconnect the
battery power by removing the negative battery lead from the battery.
2.
Mark the wiper arms’ parked location with
masking tape for reference (Figure 2 on the next
page). It will be easier to access the wiper linkage with the wiper arms midway through their
travel.
