3.0
Installation
- GTD Series Installation, Operation, Maintenance and Parts Manual
3.8 Baffle Assembly and Placement
Secured Joints and Baffle Location for Reflectors
Different inputs and models utilize different baffle lengths.
Remove all enclosed baffle sections from box and retain
with applicable heater. Reference shipping label for proper
baffle size.
Each 840mm baffle section must be assembled with other
baffles and placed in the radiant tube section furthest from
the burner.
Important:
Omit one section of baffle if heater
is configured with a U-bend or Elbow accessory fitting.
NOTICE
6M
15M
9M
12M
Burner Control Box
with Burner Tube
Key
Expansion joint on
Reflectors
Secured joint on
Reflectors^
Primary Combustion
Chamber Tube with clamp
Radiant Tube with clamp
Baffle location
21
18M
*
*
*
45 to 60 kW models utilize a secondary
aluminized steel combustion chamber
placed immediately downstream of the
primary combustion tube.
When heaters configured with a
U-shaped accessory fitting (TF1B), the
location of the reflector expansion joint
differs from that shown at left. Ensure
allowance for expansion on the primary
leg of the U-tube installation.
*
Stainless steel clamp on 50-60 kW models.
Stainless steel clamp on 50-60 kW models.
^
