30
EN
B. OPErATION
1. Press the B key to choose a mode. Press the A key (in any mode/display) to turn on the EL
backlight for 3 seconds.
2. Setting the digital time
In the time mode press and hold key C for 2 seconds until the seconds flash. Use key B to choose
which feature you wish to set:
Hour -> Minute -> Year -> Month -> Day ->
• In each sequence use key D to make the required settings.
• Press key D to then return the seconds to 0
• Press key C to return to time mode.
• 12/24 hour format:
In time mode use key D to change between a 12-hour and 24-hour display.
3. Setting the analogue time
Pull out the crown on the right – the seconds hand stops moving. Turn the crown clockwise to move
the hour and minute hands. When the crown is pushed back in the seconds hand starts to move
again.
4. Alarm Function
You may choose up to 5 independent alarm functions. Start with the settings for hour, minute, month
and day. When the alarm function is active a signal sounds for 10 seconds as soon as the current
alarm time is reached. You may also activate an hourly time signal. In this case the watch bleeps
twice on every full hour.
The alarm number (AL1 to AL5) is shown in the alarm display. In alarm mode press key C to turn this
display ON / OFF.
In alarm AL1 mode press key C to select the snooze (SNZ) alarm. Press key C to turn the snooze
function ON / OFF and activate the display. When the snooze function is turned ON the signal is
repeated 5 minutes later in the AL-1 function and then stops automatically after 1 minute.
Press key C to turn off the snooze function.
The following alarm types may be selected:
1 One-off alarm (set hour, minute, month, day):
Alarm signal sounds once at the preset date/time.
