2: Remove cam assembly
from cover
3: Install mortise cylinder (sold separately)
with cylinder nut provided
Cam orientation as shown
with key removed
Mortise cylinder
Unfasten
(2) screws
Set OKC cam
as shown
DP
(OFF)
5: Set slide selector switch functions (See Table A on page 4)
4: Re-install cam assembly
WRONG
6: Connect 9-volt battery and
install as shown
(Default settings shown)
Collar required if distance
is greater than 5/16"
Optional collar can be ordered
from Detex (p/n: ECL-1595)
If 7-pin cylinder is used -
OBSERVE
STATUS INDICATOR
(OFF)
Turn key CCW
to UNLOCK cover
(Approximately 8 times)
STEP 1: REMOVE COVER FROM BACK-PLATE
STEPS 2-6:
PREP DEVICE
(If Key Stop is required, see OPTIONAL KEY STOP page 6)
CORRECT
A
B
104889 Page 3
AR
DP
P/N: 100980
1/4-20 x 1" PPH MACHINE SCREW
P/N: 103276-63
#14 x 1" PPH TYPE AB, SELF-DRILLING
THREAD FORMING
P/N: PP-5183-29
#6 x 1-1/4" PPH, TYPE AB THREAD FORMING (SMS)
P/N: PP-5360-108
6-32 x 1/2" PPH TYPE C THREAD FORMING (ROLLING)
HARDWARE LIST
P/N: 102642-3
1/4" x 1-3/16" ANCHOR
P/N & DESCRIPTION
#7 (.201")
7/32" or 3/16"
(OPTIONAL)
#32 (.116")
1/4"
DRILL SIZE
#35 (7/64")
SYMBOL
