25
INS9000 220523
DESIGNED SECURITY INC.
1402 Hawthorne Street Bastrop, Texas 78602
800-272-3555
Fax 512 321 9181
www.dsigo.com
Email: [email protected]
Congratulations on your purchase of a DSI Optical Turnstile system.
This guide provides information for cleaning and maintaining the finishes, materials and optical paths of DSI’s standard
finishes on our turnstile line. Including ES810, ES811, ES831, ES8500, ES8300, ES880,and ES860, ES9000
DSI recommends the following information be distributed to appropriate personnel to preserve long lasting appearance of
the finish, and to maintain clear optical paths for the Infrared beams.
Stainless Steel -
Soap and water may be used to clean stains. Use a quality stainless steel cleaner/conditioner to preserve finish.
CAUTION: Avoid getting polish or solvents on the Acrylic panels to prevent contaminating the optical path.
Solid Surfaces (i.e. Avonite
®
or Corian
®
) and Laminates-
Soapy water or ammonia-based cleaners will remove most dirt and stains from Solid Surface and Laminate
finishes.
Additional Corian information is available from the DuPont Corian website:
http://www.corian.com
Brass -
These finishes are clear-coated and should be polished with any product labeled as appropriate for a clear-coat
finish. Automotive clear-coat polishes work well for this application. (Turtle Wax’s Clear Coat Polish and Restorer
is what we use at the factory)
Powder Coat Painted -
Clean with mild soap, water and a soft non-abrasive cloth. A periodic use of a non-ammonia based cleaning
solution (Formula 409) can be used for oils or stubborn stains. Always apply by hand using a circular motion.
Acrylics -
CAUTION: Never use ammonia-based glass cleaners, abrasive cleaners, or paper towels to clean
Acrylic.
These surfaces should be cleaned with a soft cloth dampened with soap and water, or use a spray cleaner such as
Chemtronics® ES1668; at
http://www.chemtronics.com/
or you may call Chemtronics at 800-645-5244
for more information.
Optics -
The Acrylic over the sensors and reflectors must be kept optically clear for the Infrared Beams to
function properly. Cleaning personnel need to be instructed to avoid wiping any oils or other polishes on these
panels. Use of alcohol or ammonia based cleaners may leave a static charge which will attract dust. The
Chemtronics® ES1668 is an anti-static cleaner that works well. Any similar anti-static cleaner approved for use on
Acrylic, such as LCD monitor cleaner, should work.
Dust accumulation on the inside of these Acryic panels, and on the Sensors/Reflectors themselves, can impair the
optical path which may lead to false alarms. A periodic inspection after initial installation may help determine the
appropriate interval for cleaning the inside surfaces, based upon the environment at the site.
CARE AND CLEANING
Summary of Contents for DSI ES9000-48
Page 1: ...ES9000 48 BARRIER OPTICAL TURNSTILE INSTALLATION AND OPERATION INSTRUCTIONS ...
Page 2: ......
Page 12: ......
Page 22: ......
