Detex DSI ES9000-48, Assembly, Installation And Operation Instructions

Page: 11 / 27

11 INS9000 220523
DESIGNED SECURITY INC.
1402 Hawthorne Street Bastrop, Texas 78602
800-272-3555
Fax 512 321 9181
www.dsigo.com
Email: dsi@dsigo.com
COVER INSTALLATION
When all covers are removed, some must be installed in a specific order. The following order accounts
for that sequence.
All fasteners should easily install using hand tools—PLEASE DO NOT USE POWER TOOLS.
LOWER SENSOR COVER
 In the rare case the Lower Sensor Cover is removed, it can be reinstalled at any time.

Align cover approximately 1/2” above finish location.

Lower onto hook system.
 Install 2 Truss Bolts in mounting holes under acrylic cover

Replace labeled acrylic cover to original location.
MOTOR COVER INSTALLATION
 Align cover approximately 1/2” above finish location.
 Lower onto hook system.

Install 2 Truss Bolts in top tabs to anchor cover.
CENTER SENSOR COVER INSTALLATION
 Return cover to original location.

Align mounting holes.

Install 2 Truss Bolts in mounting holes.
 Replace labeled acrylic cover to original location.
TOP COVER INSTALLATION

Return top cover to original location, noting orientation so Entry and Exit Displays are on correct ends.

Rounded center protrusions are a tight fit. Align precisely.
 Plug in displays. Entry is 8-pin modular connector. Exit is 6-pin modular connector.

Lower onto pedestal.
END COVER INSTALLATION STEPS

Stand at end, grip both sides of end-panel and align straight onto pedestal, approximately 1”above finish location.
 Lower end-panel onto hook system.

Rotate fastener 1/4 turn clockwise to latch.
 Install card reader acrylic cover.