7
OpenAttendant
Licensing: Releasing the Software
Licensing: Releasing the Software
In order to be able to configure and
use the OpenAttendant program
package in your communications
system, you require a release key.
The licence confirmation you re-
ceived with the program package
contains detailed information.
To generate the release key …
1. Presuming the memory card has
been installed properly in your
OpenCom 100, you now require:
– the licence confirmation for
OpenAttendant with the trans-
action record (TAD-…);
– the serial number of your
OpenCom 100. You can view the
serial number on the Web con-
sole of the OpenCom 100 in the
Configurator’s
System Info:
Versions
menu;
– Internet access to generate
the release key on the DeTeWe
licensing server using these de-
tails.
2. You can find notes on how to
proceed when generating the
release key in the licence confir-
mation.
3. In the
Configurator’s
SYS Configuration: Add-ons
menu, enter the release key for
the OpenAttendant program
package. This activates the pack-
age.
Then save the OpenCom 100 config-
uration. The release key is then also
saved in the configuration file. In the
event of servicing, after resetting the
hardware of the system for example,
you can reimport this configuration
file and OpenAttendant is then reac-
tivated for the program package.
Note:
If it should be necessary to
change the OpenCom 100 module, a
new release key must be generated
using the new serial number.
