5
OpenAttendant
Installing a Memory Card
Installing a Memory Card
The same memory card is used for
the OpenAttendant program pack-
age as is used for the OpenVoice
voicemail system.
This manual is intended for persons
authorised to install such memory
cards, in the event that there is still
no memory card available in the
communications system.
Safety Notes
Please note:
The memory card
(multimedia card or compact flash
card) may only be installed by au-
thorised personnel because the slot
for the card is located on the module
board of the communications system.
DANGER!
High voltage in-
side the device.
Note:
If you use a memory card
other than the one supplied by De-
TeWe, DeTeWe will not accept any re-
sponsibility for the correct function-
ing of the OpenAttendant.
To install a memory
card …
1. Unplug the OpenCom 100.
2. Open the OpenCom 100 enclo-
sure cover.
3. In the case of an OpenCom 105/
110/120: Remove the module
cover.
CAUTION!
Make sure you
protect yourself against electro-
static discharge.
Static electricity can damage the
memory card. To avoid such dam-
age, the static electricity must be
earthed from your body. Work only
in an anti-static environment. If pos-
sible, use earthing underlays or anti-
static mats.
OpenCom 110 and OpenCom 120:
Press back both lockable hooks (1)
and (2) and lift the cover upwards.
1
2
