Deteknix Quest Pro, User Manual

Page: 6 / 20

ASSEMBLE
INSERT ARM BAND
Use a phillips screwdriver to
loosen the three screws of the
handle until it start to slide.
Adjust the handle forward or
backward until your arm fits
comfortably in the cup.
Pull the cam-lock paddle out
and extend or collapse the
lower rod to a proper
length. Push the cam-lock
paddle back to the close
position.
ADJUST HANDLE POSITION
ADJUST ROD LENGTH
ADJUST COIL ANGLE
Insert the threaded
bolt through the hole
of lower stem and
search coil. Tighten
the search coil and
wing nut.
1
2
3
Follow the steps of
guide to insert the
band into arm rest
cup.
Press POWER for 1sec to
power on. Place the
headphone to within
10cm of the Quest, press
the power button once.
The LED indicator of the
transmitter will change to
steady condition.
Unfold the headphone
pad. Select the appropriate
lock-in position on both
sides of the headband.The
pads will adjust the angle
automatically according to
your head size.
UNFOLD HEADPHONE
PAIR HEADPHONE