background image

8525-0377-0M Rev A 

x

 8432-CH Owner’s 

INTRODUCTION 

The Detecto Model 8432-CH Pediatric Scale with Inclined Chair Seat is ideal for use in 
health clinics and medical practices for weight measurement of infants and tots. The scale 
has an easy to clean seashell-shaped plastic seat that can be mounted in three different 
directions for optimal comfort of the child, and a durable, sturdy enameled steel scale base. 
 
This manual is provided to guide you through assembly and operation of your scale. Please 
read it thoroughly before attempting to assemble or operate your scale and keep it available 
for future reference. 
 
This manual is for use with the following Digital Pediatric Scale models: 

8432-CH, 8432-CH-AC, 8432-CHKGEU, and 8432-KG-CH 

 
 

SPECIFICATIONS 

Capacity ….....…..…..…  44 lb x 0.05 lb / 20 kg x 0.02 kg 
Shipping Weight …....…  33 lb (15 kg) 
Scale Height ....….….....  37.5 in (95.3 cm) 
Display ….….....………..  Six-digit, seven segment, 0.7 inch (17.8 mm) high LCD 
Power .........…………....  Six “AA” Alkaline, Ni-Cad or NiMH batteries (

not included

OR

 an 

optional 100 to 240V AC 50/60Hz 12V DC 1A wall plug-in UL/CSA 
listed AC power adapter (Cardinal part number 6800-1045). 
Models are available with the AC adapter included. 

Keyboard .….....….........  Membrane type with 5 keys and 4 directional arrows 
Connectivity: …………..  RS232 serial port 

 
 

UNPACKING INSTRUCTIONS 

x

  Remove scale from carton by lifting up with equal force from column and platform base. 

x

  Remove all plastic wrapping, foam fillers and cardboard material from the scale. 

x

  Place scale upside down on level, stable surface and remove all cardboard packing from 

bottom of scale base. 

x

  Return scale to upright position and check for any damage incurred in shipping. If scale 

has been damaged, place a claim with the carrier. Use the original carton and shipping 
material to return the scale. 

x

  Remove and unpack the AC power adapter, if the scale was ordered with this option. 

 

PRECAUTIONS 

Before using this instrument, read this 
manual and pay special attention to all 
"WARNING" symbols: 

 

IMPORTANT 

 ELECTRICAL 

 

 

      WARNING 

Serial Number 

_____________________ 

Date of Purchase 

___________________ 

Purchased Form 

___________________ 

__________________________________ 

__________________________________ 

RETAIN THIS INFORMATION FOR FUTURE USE

 

Summary of Contents for 8432-CH-AC

















Reviews: