v.200615
19
ENGLISH
ENGLISH
ASSEMBLY
ASSEMBLY
STEP 10
STEP 10
ATTACHING THE COUPLER
1. Attach the Coupler (2) to the Coupler Base (4), using two sets of M12 x 75 bolts (20b) and M12
nuts (20n). When installing the front bolt, thread it through the center link of the Safety Chain (1) to
secure the Chain to the Coupler.
2. Lock the Coupler Trigger, using its Locking Pin and R-Clip.
3.
Pull up and down on the coupler to see if the coupler is fitting snug on the ball.
There must not be
play between the ball and coupler. If there is play, tighten the adjustment
nut until no play is present. If the nut is too tight, the handle will not lock.
�ig.9-1
b
n
fig.9-2
Safety Pin
R Clip
Latch
Trigger
�ig.9-3
Adjustment Nut
Item N
o.
Description
Qty.
1
Safety chain
1
2
2 inch coupler
1
20
Hex bolt M12 x 80 & nut (set)
2
